Sealing sleeves for wall brackets - Safe, standard-compliant installation of wall bushings

According to DIN 18534-1, transitions, terminations and connections of the waterproofing on installation parts and sealing rings must be made in such a way that they cannot be undercut or undercut.

We have supplemented our installation technology range with sealing sleeves for the installation of wall bushings.



Leakages should thus be detected and located at an early stage in order to prevent damage to the structure.

With the new sealing sleeves from IVT, a standard-compliant installation of wall ducts can be carried out quickly and in an assembly-friendly manner. The stable 2-component solution is easy to shorten and can be used with almost all commercially available ½" wall angles. A subsequent change of fittings or replacement of defective tap extensions or wall angles is possible without any problems.

ADVANTAGES AT A GLANCE:

• Particularly easy to install
• Easy to shorten
• Can be used with almost all commercially available ½" wall angles and construction plugs
• Targeted collection of escaping and flowing waterNo destruction of the seal by removing the construction plug
• Permanent splash protection
• Problem-free subsequent fitting replacement

Two versions are available:
IVT sealing sleeve PRO for wall bracket Rp 1/2 - Art.no. 878 659 000
IVT sealing sleeve for wall bracket Rp 1/2 - Art.no. 878 659 001