English
Deutsch (Deutschland)
PRINETO Radio control system receiver
PRINETO radio receiver 1-channel Transforms radio signals of a transmitter into control signals for electrical consumers (e.g. actuator), control via relay (16 A make relay, floating), control of a maximum of 20 actuators, manually switchable from heating to cooling, can also be used for pump logic
Description
PRINETO radio receiver 1-channel Transforms radio signals of a transmitter into control signals for electrical consumers (e.g. actuator), control via relay (16 A make relay, floating), control of a maximum of 20 actuators, manually switchable from heating to cooling, can also be used for pump logic for up to 6 transmitters, in case of failure the output is switched to 30 % (3 min on and 7 min off), installation surface mounted (in a
distribution cabinet) or directly on a flush-mounted socket (screw spacing 60 mm)
Dimensions:
Dimension: 73 x 73 x 28 mm, Operating voltage: AC 230V 50Hz, Power input:<1.5W Carrier frequnce: 868.95 MHz, Protection type: IP 30, Temperature range: 0 °C – 40 °C, Colour: white (similar to RAL 9010)
distribution cabinet) or directly on a flush-mounted socket (screw spacing 60 mm)
Dimensions:
Dimension: 73 x 73 x 28 mm, Operating voltage: AC 230V 50Hz, Power input:<1.5W Carrier frequnce: 868.95 MHz, Protection type: IP 30, Temperature range: 0 °C – 40 °C, Colour: white (similar to RAL 9010)
Specifications
| Warencode | 90321020 |
| Nettogewicht | 0.104 |
Attachments